Dealing with cracked grouts is a common problem being faced by almost every homeowner these days. Cracked grout is a common issue associated with all kind of tiles, which gives a very bad look to the floor and walls.
Reasons for Grout Cracking
There are many reasons for grout to crack and most of these are because of poor installation methods. One of the reasons of this can be excessive use of water or polymer additive in the grout mixture. Another reason can be excessive evaporation of water content in the grout mixture which leaves behind pinholes that lead to grout cracking.
Grout cracking can also occur if thinset is not used sufficiently during the installation of tiles. This is because, if the layer is not thick enough, it will pull away from the tile, leaving behind gaps of air under the tile, which subsequently leads to the breakage of tiles.
Repairing Cracked Grouts
Problem of grout cracking is an issue that can occur even in properly installed walls and tile floors. You can take up several measures to repair the cracked grouts, one of which is using grout caulk. Caulk is a substance that matches the color of the grout exactly and is available in the form of tube. One can squeeze the tube and apply it to the cracks to fill the gap. This method usually works on the cracks which are small in size, however, it is one of the easiest ways to get rid of the cracks.
Another option that one can opt for is to find the matching grout for the floor. It will be an easier option if one has some grout left over from the original installation. But, if this is not possible, then one should look for the same brand and color as the original installation.
Next step is to mix the grout and apply it on the cracked area. For this, water and grout are mixed together in a bucket in proper proportion. An important thing to be kept in mind while preparing the mixture is that right quantity of water should be used in order to obtain the perfect consistency. After applying this to the crack, wipe off the excess grout present outside the grout line and leave it for drying.
In case, the grout doesn’t stick to the surface, then one should take a saw and remove the grout present between the tiles. While doing this, one should keep in mind that pressure should not be applied to the tile, else it will break. When the grout is removed, the mixture is applied to the cracked area using a sponge, which provides a uniform and clean look.
Replacing the cracked grout can be another way of curing the cracks. It is the best way to overcome the problem of cracked grouts. Though it is an expensive procedure as compared to repairing the cracked grouts, but it ensures that the tiles will continue to serve well for a longer period of time. As a matter of fact, replacing grout will save you from the problem of re-tiling the floor and walls again.
Wrapping Up.
Depending upon your requirements, you can choose to either repair the cracked grouts or replace them to solve your problem. This would definitely add beauty to the interiors and would provide a clean look.
Copyright © 2010 FlooringSupplyShop.com
The post Dealing With Cracked Grouts first appeared on Flooring Supply Shop Blog.
Caulking Fein Grout removal tool grout Grout Grabber grout grabber adapter