Blog Title Quartz Plus Linear Shower Drain Installation Guide Meta Title Quartz Plus Linear Shower Drain Installation Instructions Meta Description ```text Learn how to install a Quartz Plus linear shower drain with step-by-step instructions for drain placement, waterproofing, leveling and tile installation. ```
Quartz Plus Linear Shower Drain Installation Guide
The Quartz Plus Linear Shower Drain is designed to provide reliable drainage while creating a clean, modern appearance for tiled showers. Its low-profile design, durable stainless steel construction and adjustable installation features make it an excellent choice for new construction, bathroom remodeling projects and barrier-free shower installations.
This guide walks you through each stage of the installation process, from selecting the proper drain location and preparing the plumbing to waterproofing, setting the drain channel and completing the finished tile installation. Following these recommendations will help create a watertight shower system that delivers dependable long-term performance.
The Quartz Plus Linear Shower Drain is available in two standard lengths, making it suitable for a wide variety of residential and commercial shower applications.
- 35.56 in. (878 mm)
- 46.70 in. (1186 mm)
Step 1: Select the Best Drain Location
Choosing the proper drain location is one of the most important decisions during shower construction. The Quartz Plus Linear Shower Drain is typically installed either against the back wall of the shower or at the shower entrance. Both installation methods provide efficient drainage while allowing the shower floor to slope in a single direction, simplifying tile installation and improving the finished appearance.
Installing the drain against the wall creates a clean, uninterrupted shower floor that is especially popular with large-format porcelain and natural stone tile. Positioning the drain at the shower entrance can help contain water while creating an attractive barrier-free transition into the shower.
Installation Against the End Wall
Mounting the drain along the back wall allows the entire shower floor to slope toward a single edge. This layout reduces tile cuts, improves water flow and creates a sleek contemporary appearance that complements modern bathroom designs.
Installation at the Shower Threshold
Installing the drain near the shower entrance provides an effective solution for curbless and accessible shower designs. Water is collected before reaching the bathroom floor while maintaining a clean, open appearance that is ideal for modern residential and commercial bathrooms.
Step 2: Prepare the Plumbing
Before installing the drain channel, verify that the rough plumbing is correctly positioned beneath the shower floor. If necessary, relocate the waste pipe so it aligns with the desired drain location. Accurate pipe placement will simplify installation and ensure the drain channel connects properly without unnecessary stress on the plumbing system.
Once the plumbing has been positioned, backfill around the pipe as needed with an approved mortar or suitable floor material to provide a solid foundation for the remaining installation.
Step 3: Install the Drain Flange
Install a standard 2-inch threaded shower drain flange and securely connect it to the rough plumbing using the manufacturer's recommended installation method. The drain flange serves as the connection point between the plumbing system and the Quartz Plus drain channel.
Please note that the drain flange is not included with the Quartz Plus Linear Shower Drain and must be purchased separately.
Before proceeding, verify that the flange is securely fastened, level and positioned at the correct elevation for the finished shower floor.
Step 4: Waterproof the Shower Floor
A properly installed waterproofing membrane is critical for protecting the shower structure from moisture intrusion. Apply the membrane over the shower floor in accordance with the membrane manufacturer's installation instructions and local building codes.
Cut an opening for the drain flange and secure the membrane beneath the flange clamping ring to create a continuous waterproof seal. Take care to eliminate wrinkles or gaps around the drain opening to ensure long-term waterproof performance.
Allow the waterproofing system to cure completely before continuing with the installation.
Step 5: Install the Coupling
Thread the supplied 2-inch coupling into the installed drain flange and hand tighten until secure. The coupling provides the connection between the plumbing system and the Quartz Plus drain channel.
Do not overtighten the coupling, as hand tightening is generally sufficient to provide a secure connection while preventing unnecessary stress on the drain components.
Step 6: Install the Drain Channel
Apply ABS solvent cement to the outside of the drain channel outlet before inserting it into the installed 2-inch coupling. Lower the drain channel into position and adjust it until the top edge of the channel is perfectly aligned with the finished tile height.
Taking time to accurately position the drain at this stage will produce a clean finished appearance and ensure proper water drainage after the shower floor is tiled.
Step 7: Level the Drain Channel
Use the adjustable support feet supplied with the Quartz Plus Linear Shower Drain to level and stabilize the channel before installing the mortar bed or tile. Verify the channel is level from end to end and securely supported to prevent movement during the remainder of the installation.
A properly leveled drain allows water to flow evenly into the channel while creating a professional finished installation.
Step 8: Complete the Tile Installation
After the drain has been securely positioned and leveled, install the mortar bed, tile adhesive and finished tile in accordance with the tile manufacturer's recommendations. Maintain a consistent slope toward the drain to promote efficient water flow and help prevent standing water.
Once the tile and grout have fully cured, clean the drain channel and install the decorative grate. Inspect the completed installation to verify the grate sits flush with the finished tile surface and that water drains freely into the channel.
Quartz Plus Features
- Available in 35.56 inch and 46.70 inch lengths.
- Central 2-inch vertical outlet for dependable drainage.
- V-shaped channel promotes efficient water flow.
- Narrow 2.75-inch channel width for a clean appearance.
- Durable ABS channel body with stainless steel grate.
- Adjustable support feet simplify installation and leveling.
- Optional debris strainer available to help reduce drain maintenance.
Helpful Resources
- Complete Guide to Design, Installation and Planning
- How to Install a Linear Shower Drain on a Joisted Wood Floor
- Quartz Linear Shower Drain Concrete Slab Installation Guide
Related Collections
When installed correctly, the Quartz Plus Linear Shower Drain provides dependable drainage, a clean architectural appearance and long-lasting performance. Careful planning, proper waterproofing and accurate drain placement are the keys to creating a professional shower installation that will perform reliably for many years in both residential and commercial applications.