Glaze N Seal Neutralizing Rinse Acid Neutralizer for Concrete Tile & Stone

Glaze N Seal Neutralizing Rinse Acid Neutralizer for Concrete Tile & Stone

Professional Acid Neutralizer and Surface Preparation Cleaner

The Glaze N Seal Neutralizing Rinse is a professional acid neutralizer and alkaline cleaner designed to remove acid residue from concrete, tile, grout, masonry, and natural stone surfaces after acid washing, etching, or heavy-duty cleaning procedures.

This specialized surface preparation solution helps restore surfaces to a proper neutral pH level before sealing, improving sealer adhesion and helping prevent premature sealer failure caused by residual acid contamination.

In addition to neutralizing acid residue, this versatile formula also functions as a powerful cleaner for removing dirt, residue, and surface contamination prior to sealing concrete, tile, masonry, and stone installations.

Key Features

• Professional acid neutralizer for concrete, tile, and stone
• Helps improve sealer bonding and adhesion
• Removes acid residue after cleaning or etching
• Helps prevent sealer failure
• Works as both a cleaner and neutralizer
• Suitable for concrete, grout, masonry, and natural stone
• Phosphate-free environmentally responsible formula
• Makes up to 10 gallons of cleaning solution
• Ideal for pre-sealer surface preparation
• Suitable for residential and commercial applications

Recommended Surfaces

• Concrete
• Ceramic tile
• Grout joints
• Brick and masonry
• Natural stone
• Concrete pavers
• Saltillo tile
• Stone and tile installations prior to sealing

Ideal Applications

• Neutralizing acid washed surfaces
• Pre-sealer surface preparation
• Tile and grout cleaning projects
• Concrete surface preparation
• Masonry restoration projects
• Post efflorescence removal cleanup
• Surface cleaning before sealing
• Commercial and residential maintenance

Application Instructions as Neutralizer

Mix approximately 3 to 5 ounces of Neutralizing Rinse per gallon of warm water. For larger projects, use approximately half a container per 5 gallons of water.

Flood the surface or apply solution liberally and allow it to remain on the surface for approximately 1 to 5 minutes. Agitate if necessary to remove stubborn residue or contamination.

Remove solution using a wet vacuum, mop, sponge, or clean towels and rinse thoroughly with clean water. Allow the surface to dry completely for at least 24 hours before applying any sealer.

Application Instructions as Cleaner

For cleaning applications, mix approximately 8 to 10 ounces per gallon of water. Apply to the surface, scrub as needed, rinse thoroughly, and allow the surface to dry completely.

Additional Uses

Neutralizing Rinse may also be used to help neutralize rinse water generated during acid cleaning before disposal into septic or sewer systems.

Why Neutralize Surfaces Before Sealing?

Residual acid left behind after cleaning or etching can interfere with sealer adhesion and may lead to premature sealer failure, hazing, whitening, or poor long-term performance. Proper neutralization helps prepare surfaces for maximum sealer penetration and durability.

Safety Information

Contains sodium carbonate and sodium sesquicarbonate. Avoid contact with eyes and prolonged skin contact. If eye contact occurs, flush thoroughly with water. If swallowed, drink water and seek medical attention.

Helpful Resources

Glaze N Seal Neutralizing Rinse - Fact Sheet

Shop Related Collections

Shop All Tile, Stone and Grout Cleaners