Glaze N Seal Natural Look Penetrating Sealer for Tile Stone & Grout

Glaze N Seal Natural Look Penetrating Sealer for Tile Stone & Grout

Professional Water Based Penetrating Sealer with Invisible Natural Look Protection

The Glaze N Seal Natural Look Penetrating Sealer is a professional water-based penetrating sealer designed to provide long-lasting invisible stain protection for concrete, masonry, natural stone, grout, unglazed tile, brick, clay tile, slate, and other porous surfaces.

This environmentally friendly penetrating sealer creates a water repellent barrier below the surface without changing the natural appearance of the material, making it ideal for installations where a natural matte finish and invisible protection are preferred.

The advanced penetrating formula helps reduce moisture absorption, water-based stains, efflorescence, mildew growth, and freeze-thaw damage while helping preserve the original appearance of tile, grout, and stone surfaces.

Available Sizes: Quart and Gallon

Key Features

• Natural look invisible penetrating sealer
• Water-based environmentally friendly formula
• Helps repel water and waterborne stains
• Reduces moisture absorption
• Helps reduce efflorescence problems
• Resists mildew growth
• Helps protect against freeze-thaw damage
• Suitable for indoor and outdoor applications
• Nonflammable with no harmful vapors
• Easy cleanup with water

Recommended Surfaces

• Mexican tile
• Brick and masonry
• Flagstone
• Concrete surfaces
• Artificial stone
• Slate and natural stone
• Stucco
• Quarry tile
• Clay tile
• Grout joints

Ideal Applications

• Tile showers and grout protection
• Bathroom tile and grout sealing
• Kitchen backsplash grout sealing
• Outdoor patios and walkways
• Concrete and masonry sealing
• Natural stone protection
• Glass block grout waterproofing
• Residential and commercial tile installations

Natural Look Protection

This penetrating sealer is designed to maintain the original appearance of the surface without creating gloss, film buildup, or surface coating. The invisible protection penetrates below the surface to provide long-term moisture resistance while preserving the natural texture and finish of stone, tile, and masonry materials.

Coverage

Approximately 100 to 700 square feet per gallon depending on surface porosity, texture, density, and application method.

Application Instructions

Always test a small area before full application to verify penetration and appearance.

Apply sealer between 50°F and 80°F. Do not apply during rainy conditions or if rain is expected within two hours after application.

For porous surfaces, apply one liberal saturating coat using a brush, roller, or sprayer. Do not allow excess sealer to remain on the surface.

For dense surfaces, apply one light coat using a sponge, sponge mop, or clean cloth. Carefully remove excess sealer before drying to avoid residue or visible haze.

Allow the sealer to cure for at least 24 hours to develop maximum water repellency and protection.

Grout Release and Waterproofing Benefits

This sealer may also be used as a grout release and to help waterproof shower grout and glass block grout installations, making cleanup and long-term maintenance easier.

Why Use a Penetrating Sealer?

Penetrating sealers help protect porous tile, grout, stone, and concrete surfaces from moisture penetration, waterborne stains, mildew growth, and weather damage without changing the natural appearance of the material.

Helpful Resources

Glaze N Seal Penetrating Sealer Fact Sheet

Shop Related Collections

Shop All Tile, Stone and Grout Sealers