Warmup Snow and Ice Melting Cable WSM 43-72 sq ft 240V

Warmup Snow and Ice Melting Cable WSM - 43 to 72 sq ft Coverage

Available Voltage: 240V

Suitable for Installation Under: Asphalt, Concrete, and Pavers

The Warmup WSM Snow Melting Cable is designed to prevent snow and ice buildup on driveways, walkways, ramps, stairs, parking areas, sidewalks, and other outdoor surfaces. These energy-efficient outdoor heating cables are suitable for installation under concrete, asphalt, or paver systems and provide reliable snow melting performance for residential and commercial applications.

Warmup snow melting cables feature a durable twin-conductor design with a single-point power connection and include a 10-Year manufacturer warranty.

Cable Coverage & Electrical Specifications

• Voltage: 240V
• Cable Length: 168 ft
• Resistance: 28.9 Ω
• Amperage: 8.3 Amps
• Output: 2000 Watts
• Coverage at 3" Spacing: 43 sq ft
• Coverage at 4" Spacing: 57 sq ft
• Coverage at 5" Spacing: 72 sq ft

Key Advantages

• 16 ft cold lead with single-point connection
• Suitable for installation in sand, gravel, concrete, asphalt, or on wire mesh
• Energy-efficient twin-conductor heating cable design
• Ideal for heated driveways, ramps, sidewalks, stairs, and walkways
• Supports full coverage or tire-track snow melting layouts
• Designed for residential and commercial snow melting applications
• Compatible with Warmup snow sensors and automatic controls

The Warmup WSM heating cable is commonly installed in concrete pours, asphalt driveways, paver walkways, loading areas, and commercial outdoor snow melting systems. Embedded up to 4 inches deep, the cable can be configured for full surface snow melting coverage or vehicle tire-track systems.

Product Specifications

• Operating Voltage: 240V
• Heat Output: ± 50 Watts per sq ft
• Cable Construction: Twin-conductor fluoropolymer insulated heating cable
• Cable Diameter: 1/4" (6mm)
• Maximum Exposure Temperature: 464°F (240°C)
• Cold Lead Length: 16.4 ft (5m)
• Warranty: 10-Year Manufacturer Warranty

Applications & Installation Information

Compatible Surface Materials

• Pavers and masonry surfaces
• Concrete slabs and walkways
• Asphalt driveways and parking surfaces
• Outdoor stairs and ramps

Compatible Base Materials

• Crushed gravel base
• Sand bed
• Insulation boards and sheets

Recommended Coverage Depth

• Minimum Coverage: 2 inches
• Maximum Coverage: 4 inches

Installation Under Pavers

For paver applications, the heating cable should be covered with approximately 2 inches of sand before installing the pavers. Pavers should not exceed 4 inches in thickness.

Installation Under Asphalt

The WSM cable can withstand direct asphalt contact for a limited time until the asphalt cools. For asphalt pours exceeding 220°F, apply a 2-inch sand layer above the cable before asphalt placement. Rollers exceeding 2 tons should not be used directly over the heating cable. Hand rolling is strongly recommended.

Installation Under Concrete

For concrete installations, ensure the cable is embedded no deeper than 4 inches below the finished surface. Re-mesh or wire mesh is recommended to properly suspend the cable within the slab during the concrete pour.

Warranty & Maintenance

When installed according to Warmup installation guidelines and properly tested throughout installation, the WSM snow melting cable system requires virtually no maintenance during its operational life. The cable is backed by Warmup’s 10-Year manufacturer warranty and protected by the Warmup SAFETYnet installation guarantee.

Helpful Resources

• Warmup Snow Melting Installation Guide
• Warmup Snow Melting Specifications & Installation Instructions PDF

Related Collections

• Shop All Warmup Snow Melting Systems
• Shop Warmup Snow Melting Mats
• Shop Warmup Snow Melting Cables
• Shop Warmup Thermostats & Accessories