Mosaics Terrazzo Penny Rounds - Cement Sprinkle

Mosaics Terrazzo Penny Rounds - Cement Sprinkle

Introducing a new penny round shape in our Eco Rock Series, crafted from Terrazzo - a sustainable material made from recycled marble, granite, quartz, glass, shell, and other carefully selected aggregates. Renewable and recyclable, Terrazzo pairs eco-friendly benefits with a fresh, design-forward aesthetic. The timeless penny round shape adds texture and visual interest, making it a versatile, stylish solution for modern spaces.

Eco Rocks are crafted from Terrazzo, a sustainable material composed of marble, granite, quartz, glass, shell, and other carefully selected aggregates bonded with cement. Made entirely from recycled materials, Terrazzo is both renewable and recyclable. This innovative series combines the eco-friendly advantages of Terrazzo with a fresh, design-forward aesthetic, offering a stylish and sustainable solution for modern spaces.

Sealing is required.

Material: Terrazzo
Piece Size: 11 1/4" x 12"
Individual Size: 7/8
Sq Ft Per Piece: 1
Thickness: 3/8"
Colors: White (Cement Sprinkle)
Finish: Honed

• Use for Interior residential walls, Interior residential floors, Interior commercial (Walls only Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding
• Notes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not
  considered a defect of the material but a characteristic.

Installation Guide

Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.

Installation recommendation/Applications

• Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
• We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
• Applications:

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
• Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish