Raimondi 45 Degree Shaping Wheel - TCGLFPW45S1

Raimondi 45 Degree Shaping Wheel - TCGLFPW45S1

45 degree shaping wheel wet & dry use

Shaping wheel for 45° profile (jolly)

Futures;

• Size: 120mm 4 3/4”
• It is possible to perform both half/bullnose and 45° miter (jolly) profiles.
• Half/bullnose profiles can be performed on slabs and tiles with a thickness from 5 to 12 mm. Available radius: 6 mm, 10 mm, 12 mm.
• 45° miter (jolly) profiles can be performed on slabs and tiles with a thickness from 3 to 12 mm.
• For finishing/polishing the shaped edges, it is recommended to use an angle grinder freehand (max 1400 rpm) with diamond pads.
• It can be either used dry (with a dust extractor) or with water (with kit for wet cut art.433PWWA)