Alpha Tools Wet Dry Vacuum HEPA1050 - 13 Gal

Alpha Wet/Dry Vacuum HEPA1050 - 13.2 Gallon

Safely Extracts Harmful Dust Directly from the Tool

The Alpha® HEPA Wet/Dry Vacuum is a safety vacuum cleaner that extracts dust where harmful dust is produced - directly from the power tool. The vacuum has an automatic filter cleaning for consistently high suction power.

Equipment Included: Stainless Steel Vacuum Tube Set (Part No. 102018), Hose Assembly 16.4 ft (5m) (Ø 1.5in/38mm) (Part No. 118176), Fleece Filter Bag (Qty 5) (Part No. 102066), Crevice Nozzle (Part No. 102016), Dry Floor Nozzle (Part No.102125), Round Brush (Part No. 102017), Rubber Adapter #1 Ø 21/25/32 mm (Part No. 118122), Rubber Adapter #2 Ø 38/43mm (Part No. 118141), Torx Key T30 (Part No. 118124), Brush Strips (2pc Set) 450mm For 102125 (Part No. 102127), Rubber Strips (2pc Set) (Part No. 102126)

Features:

• Canister Volume of 13.2 Gallons
• Adjustable, Foldable Push Bar
• Extremely Robust Chassis with Locking Brakes
• On-Board Receptacle for Power Tools
• Virtually Dust-Free Work for Maximum Health Protection
• Patented HEPA 13 Cartridge Filter With 2 Independent Filter Chambers
• Consistent High Level of Suction Power During The Filter Cleaning
• Automatic Filter Cleaning Through Air Backwashing; Done Every 45 Seconds
• Visual And Acoustic Warning Signal
• Dust-Tight Lockable Connection Nozzle
• Easy-To Clean Blow-Out Filter
• Flat Surface on The Motor Head
• Optional Adapter Plate for All Common Tool Casesual

Product Details - HEPA1050

Rating - 120 Volts, Frequency- 50Hz - 60Hz
Amperage - 9.0A
Power - 1080W
Weight - 35 lbs (16 kgs)
Cord Length - 33ft (10m) 3/14 AWG
Hose Size - 1.5in x 16.4ft (5m)
Tank Capacity - 13.2 Gal (50 L)
Filter Capacity - 5.3 Gal (20 L)/7.9 Gal (30 L)
Air Flow Rate - 157 CFM
Water Lift - 100" (254.9cm)
Sound Decibels - LpA = 74 dB(A)'
Tank Dimensions - 21.3 x 15.4 x 30.3 in (540 x 390 x 770 mm)

FAQ's

Question: How often do I need to replace the HEPA 13 Cartridge Filter?
Answer: The HEPA 13 Cartridge Filter is cleaned every 45 seconds to maintain clean and HEPA Vacuum will send you visual and acoustic warning signal for the time to replace fleece filter bag so that you don’t usually need to replace often unless it is broken.

Question: Can I use my dust shroud that is not from Alpha®?
Answer: The HEPA Vacuum comes with two Rubber Adapters to connect most popular dust shrouds on the market, so you should be able to connect with your dust shroud without issue.

Question: What kind of maintenance do I have to do on the HEPA Vacuum?
Answer: Alpha® recommends cleanup of the Blow-Out Filter when you replace a fleece filter bag. That is it!

Question: Which brand of toolbox can be connected to the HEPA Vacuum?
Answer: The HEPA Vacuum’s optional adapter plate accepts toolboxes from Makita, Festool, DeWalt and Bosch.

Question: Does Alpha® offer any dust shroud?
Answer: Yes. Alpha® offers variety of Dust-Free Guards for cutting, grinding, and core drilling in various sizes. You can find them at www.alpha-tools.com.

Question: Can I use the HEPA Vacuum with 9” dry wall sanders?
Answer: Yes. The OSHA Table 1 we discussed above applies for Silica Dust so that you can use the HEPA Vacuum with a 9” Dry Wall Sander.

Alpha Wet/Dry Vacuum HEPA1035 - HEPA1050 Manual