Raimondi Diamond Honed finish Wheel for Bulldog - Step 3
From: $245.00Description
Raimondi Diamond Honed finish Wheel for Bulldog Machine - Step 3
All wheels are tested and balanced to give the best profiling results with our Raimondi Bulldog machines.
The Yellow wheel is the first wheel to be used in the 3-step polishing line
BDW38S3NT Step 3 Honed finish
- Honed finish (first step to polish) - 3/8" (10mm)
- Diameter - 5" (125 mm)
- Arbor size - 25/32" (20 mm)
- Grit - Honed (400 grit)
BDW58S3NT Step 3 Honed finish
- Honed finish (first step to polish) - 5/8" (15mm)
- Diameter - 5" (125 mm)
- Arbor size - 25/32" (20 mm)
- Grit - Honed (400 grit)
STEPS
Step 1: uses the Segmented milling wheel to rough out the shape.
Step 2: Rough finish wheel of approximately
Step 3: Use yellow wheel for honed finish.
Step 4: Use red wheel for satin finish.
Step 5: Use grey wheel for glossy finish.
Fits on both Bulldog machines (BD1WD and BD2WD) and back-finishers (BDSABF and BDCBF)
45°ANGLE - A 45° angle can be achieved with the milling wheel and rough finish wheel. The two 45° wheels available can be used on all Bulldog machines, this includes the back-finishers.
BULLNOSE - Bullnose can be attained with the milling wheel, and rough finish wheel. These wheels come both in sizes 3/8" and 5/8"
MATERIALS - Built in hard material resin.