Raimondi Milling Wheel for Bulldog Continues rim - Step 1
From: $480.00Description
Raimondi Diamond Milling Wheel for Bulldog Machine Continues Rim - Step 1
All wheels are tested and balanced to give the best profiling results with our Raimondi Bulldog machines.
BDW38S1FC Step 1 Milling Wheel - Continues Rim
- Milling wheel segmented radius - 3/8" (10mm)
- Diameter - 4 3/4" (120 mm)
- Arbor size - 25/32" (20 mm)
- Grit - 80
BDW58S1FC Step 1 Milling Wheel - Continues Rim
- Milling wheel segmented radius - 5/8" (15mm)
- Diameter - 5" (125 mm)
- Arbor size - 25/32" (20 mm)
- Grit - 80
STEPS
Step 1: uses the Segmented milling wheel to rough out the shape.
Step 2: Rough finish wheel of approximately
Step 3: Use yellow wheel for honed finish.
Step 4: Use red wheel for satin finish.
Step 5: Use grey wheel for glossy finish.
Fits on both Bulldog machines (BD1WD and BD2WD) and back-finishers (BDSABF and BDCBF)
Raimondi Bulldog 3/8-inch Radius 80 Grit Milling Wheel is STEP 1 in making your bullnose piece. The New Continuous Rim 3/8-inch radius Milling Wheel is 80 grit to start the removal of heavy stock from your tile or stone to give the piece it's 3/8-inch radius Rough Shape
45°ANGLE - A 45° angle can be achieved with the milling wheel and rough finish wheel. The two 45° wheels available can be used on all Bulldog machines, this includes the back-finishers.
BULLNOSE - Bullnose can be attained with the milling wheel, and rough finish wheel. These wheels come both in sizes 3/8" and 5/8"