Smiths Royal Seal Low Sheen II RS 100 1 GL

Smith's Royal Seal II - RS 100 Low Sheen 1 GL

Single component solvent-based acrylic polymer

Smith’s Royal Seal Low Sheen is a low VOC, non-yellowing, acrylic-based, liquid sealer for decorative concrete, brick, interlocking pavers, natural and manufactured stone.
Transparent and easy-to-apply, this product enhances the beautiful rich tones with a low sheen appearance. Smith’s Royal Seal has been formulated to seal and protect decorative colored concrete by producing a hard, yet flexible, clear film.

• Low Sheen
• Ultra Violet Light Resistant
• Alkali Resistant
• Fast cure time
• Infinite inter-coat adhesion
• Non-yellowing
• Good blush resistance
• Low VOC
• Interior and Exterior application
• May contribute to LEED credits
• EQ Credit 4.2 Low-Emitting Materials: Paints & Coatings

Smith’s Royal Seal dries quickly. Drying times may be extended depending on application rate, temperature, humidity and project conditions. Restrict foot traffic for at least six hours. Twelve hours is preferred.

Cure Times: (optimal) Temperature - 73°F Relative Humidity - 50% Recoat - 2 hrs.-in > night Light Traffic - 6 hours Wheel Traffic - 24 hours

Coverage per Gallon Porous: 50-200 sq. ft. Dense: 200-400 sq. ft.
Note: Coverage depends on surface porosity and profile. Atomization will increase coverage.

Recommended Use: Applied as a film forming protective coat to increase the durability and longevity of Smith’s Color Floor, Color Wall and Color Accents.
Not Recommended For: Pre-sealed and/or nonporous surfaces including, but not limited to ceramic and porcelain tile.

Click here for Product Information

MSDS