EZ Seat and Shelf Installation Instructions
The EZ Seat is your best choice for a strong, durable and easy to install tile shower seat. The corner style bench seat is quick and convenient. With installation in as little as 10 minutes, professional tile installers and home owners will both love the clean simplicity EZ Seat. Follow these three short steps to install your EZ Seat and finish your project fast.
New Install
Prepare to install EZ Seat by measuring and marking the desired seat height. 18 inches is a comfortable seat height. Install wall tile below the determined height of the seat cutting tiles as needed.
Apply a generous bead of quality waterproof urethane adhesive along the top edge of the tile where the seat is to be installed. Make sure the bonding surface is free of loose dirt and debris. Set the EZ Seat in place and clean any excess adhesive.
Scuff the top surface of the EZ Seat with sand paper to help with bonding. Apply a quality waterproof urethane adhesive to the top of the seat and set the tile in place. Cut tile as needed. Allow a 1 inch overhang to conceal metal support. Finish with colored caulk that matches grout color
Retro-Fit Install
Prepare to install EZ Seat by measuring and marking the desired seat height. Mark two level lines 16 1/2″ from corner Cut tile along lines with an angle grinder fitted with a diamond blade.
Apply a generous bead of quality waterproof urethane adhesive along the tile cut where the seat is to be installed. Make sure waterproof adhesive fills all gaps including places where the existing water barriers have been compromised. Set the EZ Seat in place and clean any excess adhesive.
