Tile Drain Instructions
ASME A112.18.2-2011/CSA B125.2-11
Shower pan and 2” standard flange should always be installed by a professional contractor.
Installation Instruction :
Step 1: Leak Test
Plug 2” drain flange and fill shower pan with water to check for leaks.
Step 2: Drain Collar
Thread collar into 2” drain flange. Keep turning to desired elevation for finished surface.
Step 3: Sub base and Tile
Float sub base minus tile or stone 1% to 2% pitch to drain. Then set tile to finished surface of collar.
Step 4: Tile Drain
For best results use tape to cover grill on tile drain. Use thinset to set tile into tile drain tray and set tile to finished surface of the drain tray. When ready, grout and remove tape.
2″ Low Profile Bolt-Down Shower Drain (NOT included)
MADE IN THE USA
The post Tile Drain Instructions – TD101 first appeared on Flooring Supply Shop Blog.