Blog : leveling | Flooring Supply Shop BlogFlooring Supplies

The Must-Have Flooring Tools

There has been an increasing trend among homeowners to opt for the ‘Do it Yourself’ task regarding home renovation. Some of these DIY home renovation tasks include flooring, painting and grouting, among many others. These DIY tasks not only demand homeowners to possess a particular skill set, but also require them to have requisite tools.

Possessing adequate tools is necessary to accomplish the task properly. Having necessary tools not only reduce the efforts and stress, but also ensure perfection in job. Moreover, a badly done home renovation defeats the sole purpose of doing DIY, which is to save money. This is so because a badly done DIY task would result in incur of expenses for repair and correction. Hence, homeowners who wish to indulge in DIY home tasks should have all the necessary tools required for successful completion of the job.

One of the most commonly chosen DIY tasks by homeowners is flooring and that too tiling of the floor in particular. While installing tiles at home, one of the most common problems faced by them is lippage. This problem occurs when the tiles are not uniformly set to form one flat surface. As a result, the aesthetics of the house is adversely affected and also lippage may result in cracking or breaking of the tiles. For this, homeowners can opt for the Tuscan Leveling System which ensures that the tiling is done perfectly without any lippage. This leveling system has been designed for DIY enthusiasts and can be used by homeowners with any skill set. Another tool that proves useful while tiling is the tile spacer that facilitates straight grout lines. The uniform finish renders a neat look which enhances the appearance of the place.

In addition, homeowners can also purchase the Primo Bucket Brush, which takes the hard work and mess out of cleaning buckets, saving a lot of time, money, and water.The Bucket Brush is designed to use a ½” portable drill to provide the power. Not only does the Bucket Brush save time, it saves the environment. Mixing buckets can now be used over and over again before they ever end-up in landfills.

Homeowners doing flooring on their own must also possess tools like tile cutters, tile saws, diamond hole saws and undercut saws. In addition, they can purchase straight edges, trowels, grout floats, diamond blades and stone fabrication products. The grout grabber tool, polishing pads and Montgomery degree pitch level tool are few of the other tools that homeowners should have.

Besides these specific tools, there are several other tools that the homeowners must possess to ensure proper completion of DIY flooring tasks. The most important among them is the safety gear, which includes knee pads, gloves, eye gear and respiratory mask, among others.

Homeowners should ensure that they possess all the tools before initiating any DIY project. However, before going on a shopping spree to purchase flooring tools, homeowners should first make an itinerary of the tools that are actually required. This would help avoid purchasing something that is not required and also ensure buying tools that are necessary.

Click Here to View Action Video

Raimondi Tile Spacer Leveling System

The most important as well as the most daunting aspect of setting tiles is to achieve perfect leveling. A common hindrance faced while setting larger format, thicker tiles as well as un gauged and thin tiles is the uneven floor foundation, which makes leveling all the more difficult. As a result, tiles that seemed leveled during installation often have unevenness in the height, once the thinset or adhesive cures, which is unappealing. This can, however, be overcome with the help of ‘Raimondi Tile Spacer Leveling System’ that ensures perfect leveling of the tiles. Fabricated using quality raw material, these spacers are durable, cost effective and easy to use. Not only does it result in proper leveling of the tiles, but also facilitate the tile setting process.

Achieving a smooth level surface, the Raimondi leveling spacers can be used for tiles with varied dimensions. For a tile thickness of minimum 1/8", maximum 1/2", a minimum 3/32" joint is required, which at times is difficult to achieve. However, with the help of the spacers it is no longer a daunting task and can easily be accomplished in just few minutes. Depending upon your requirement, you can select amongst the different Raimondi leveling system kits that include leveling wedges, spacer clips and installation pliers.

One does not have to be a well-qualified professional to use the Raimondi leveling spacers. These spacers are quick and easy to set & remove, and homeowners can do it on their own, without any professional guidance. In case you plan to install tiles on your own, you can make use of these spacers for proper leveling of the tiles. After spreading the tile adhesive, you need to insert the support underneath the tiles on all the sides. In case of larger and thicker tiles, it is advisable to use two support instead of one, on all four sides. Once properly done, set the tiles over the adhesive, and to strengthen the bond you can beat it with a rubber mallet. Next, you need to insert the wedges into the support, which can be easily done by using the special traction-adjustable pliers. However, you need to exercise caution not to pass the breaking point. After the tile adhesive sets and cures, the leveling support needs to be removed, which can be done with the help of special traction-adjustable pliers or rubber mallet. Instead of using these tools, you can easily remove these supports by simply kicking them with your feet, but make sure to beat parallel to the joint.

Not only is the Raimondi leveling spacer easy to set and remove, but has various other features that have made it a preferred choice of many, especially tile installers. Consuming less time and effort, it holds the tiles firmly in place. One does not have to worry about the voids or coverage as the Raimondi leveling spacer enhances the adhesion of the thinset to the tiles. Rather than pulling tiles from the thinset, these are pushed into it, which is easier. Since it is quick and easy, it greatly improves the overall quality of the tile installing project.

Click Here to View Action Video

Do you have adequate tools to finish DIY task

A number of individuals undertake ‘Do It Yourself’ home renovation projects as a hobby. Some of the most popular DIY projects include painting, tiling and grouting. However, it is important to properly complete the job at hand. An improper home renovation job can result in significant repairs and maintenance expenses in the future.

One of the prerequisites for undertaking a DIY project is the availability of proper and effective tools for the job at hand. Having proper tools can significantly reduce the efforts involved in completing a home renovation project. Furthermore, the right tools can also ensure that the job is done properly the first time, so that there are no repairs and maintenance requirements in the future.

While tiling, one of the common problems faced by DIY enthusiasts is that of lippage. Lippage occurs when tiles are not set properly, and can affect the aesthetics of the tiled area. Furthermore, lippage can also cause the tiles to crack and break in the future. It is for this reason that you should consider using a tool such as the Tuscan Leveling System. Such tools are specially designed for DIY enthusiasts, and ensure that the tiles are set in a uniform manner.

Another tool that could help you in your tiling project is a tile spacer. The main purpose of a tile spacer is to ensure that all the tiles are set at equal distance apart. Tile spacers will also enable you to create straight grout lines, thereby ensuring a uniform finish.

Most people generally call in a professional contractor when they need to design a shower area, but there are a number of tools that can enable you to complete this task by yourself. Quick pitch systems and ready to tile shower pans are two such tools that can enable you to create a custom designed shower area by yourself. These tools can ensure that a standard slope of 1/4” is created on the shower floor. Furthermore, a ready to tile shower pan can be tiled immediately after installation, thereby saving on the total construction time.

Certain projects such as plumbing, carpentry, roofing and landscaping require you to create a level slope for maximum effectiveness. It is in order to complete such projects in a proper manner that you require tools such as Montgomery degree pitch level. These tools are easy to use, and can enable you to effectively check the pitch or slope.

Finally, apart from the specific tools for particular projects you should ensure that you have adequate safety equipment. Some of the commonly used safety gear includes respiratory masks, knee pads, gloves and cleaning cloth.

Undertaking a DIY project offers a number of benefits over hiring a contractor for the job. Not only does a DIY project bring about a sense of accomplishment, but also results in significant cost savings. Therefore, it is important to have adequate tools and equipments in order to be properly prepared for the DIY project. This will ensure that your project is completed in a timely and a proper manner.

Tag: leveling

The Must-Have Flooring Tools

Raimondi Tile Spacer Leveling System

Do you have adequate tools to finish DIY task

About Us

Contact Us

Quick Links

Newsletter Subscription