Blog : mosaic tiles | Flooring Supply Shop Blog - Part 2Flooring Supplies

Choose the right flooring option to enhance the value of your house

Flooring is one of the most prominent aspects of a house that a potential buyer considers before making a purchase decision. It is for this reason that upgrading or renovating the flooring is essential before putting up the house in the real estate market. Aesthetically appealing and high utility flooring would not only enable you to sell your house quickly but would also increase the value of your house.

Utility of a floor refers to its ease of maintenance and high durability. Certain floors are resistant to spills and stains while there are some that can be refinished a number of times. Although such high utility floors might be expensive, they would enhance the value of your house, thereby allowing you to sell it at a much higher price.

Color of the flooring is can play a major role in persuading a buyer to select your house. Light colored floors are considered to be the best option, since they make the room look larger. Furthermore, a light colored floor would also enable the buyer to visualize their furniture over the floor, thereby assisting their final decision.

Different rooms in a house require different flooring options for visual appeal. It is for this reason that you should select the right flooring option for each room in your house. Areas such as the bathrooms and the kitchens, which are extensively used, should be fitted with low maintenance flooring. Vinyl and tiles are considered to be the two best flooring options for a bathroom.

Houses with wall to wall carpeting would definitely attract potential buyers; however, stains of dirt on the carpets can be a big turn-off for them. It is for this reason that properly cleaning the carpets is essential before showing it to the potential buyers. Replacing old carpets with new ones would be an ideal option for enhancing the value of your house.

While selecting the flooring for your house you should always weigh the ‘Cost VS Benefit’ ratio to make the right decision. For example, using marble in the kitchen would enhance the visual appeal of the area but the initial price and the subsequent maintenance costs could be too high for this option.

Along with the traditional tiles and stone flooring you should also consider contemporary flooring options like bamboo and cork. Flooring material such as these would offer an environment friendly as well as cost effective option. You should also keep in mind the lifestyle habits and the income level of the prospective buyers while making the final choice.

If the perceived value of a house is higher than its price, there is a good possibility of it, getting sold off quickly. It is therefore important to make such changes to your house that increases its value for the buyers. Flooring is one of the most essential aspects of a house; it not only provides a visual appeal, but is also the factor that determines the strength of the house. Therefore, it is essential to wisely select the flooring option that is right for your house.

Marble Floors Good or Bad

Of the numerous flooring options available, a lot of people are opting for Marble flooring for their homes. Marble flooring is not only durable but also adds to the visual appeal of the house. Hence, while considering to build or to renovate your house, you can consider Marble as the flooring option, that will give a whole new look to the place. Marble flooring is probably the best long term investment in home surfaces, which increases the overall value of your asset.

Marble flooring is also popular due to its availability in various styles, colors, designs and patterns; which can easily be coordinated to match any kind of home decor. Moreover, the smooth, shiny, glossy Marble is naturally available, which makes it a green flooring option. It is easy to install and if done properly, it has minimal chances of breaking. Marble is a poor conductor of heat which helps in keeping the house cool and comfortable, especially in areas with warm climate.

Attractive and exclusive, the beautiful natural stone is available in different varieties. The veining, which is also referred to as ‘Marbleized’, are small lines of color that give the stone its unique look. These stones are available in ‘gloss surface’ which makes it shiny and reflective. In contrast, if you want a dull surface, you can use Marbles which have undergone the tumbled process. ‘Tumbling’ is a process that distresses and ages the stone to make it look dull and buffed. One can even choose the honed Marble which has a flat, matte or satin finish. The honed Marble has a lower risk of etching, where due to everyday foot traffic the initial polish of the surface is removed.

In contrast to the giant slabs available earlier, Marble nowadays is available in tiles which are easy to handle and install. One can also use Marble to make mosaics and interesting patterns that increase the visual outlook of the place. The biggest advantage of Marble flooring is that it provides a durable and long lasting surface which never needs replacing.

However, Marble though, is not the most preferred choice for flooring amongst homeowners as it can be quite expensive. However, with its numerous benefits, the demand for Marble flooring is increasing every day.

It may also require occasional re-sealing, depending upon the foot traffic, and also polishing and buffing, in case it gets dull. Marble requires proper maintenance and cleaning. One must be careful not to use the cleaning agents which contain chlorine or are acidic as it can harm its sheen.

Marble is available in unique shades with sophisticated sheen. It is durable and easy to install that blends beautifully with every kind of decor. Moreover, this smooth and polished surface provides an elegant feel to the place. Hence, if you are looking for a great flooring option for your home, which not only is durable but beautiful as well, choose Marble flooring; since it offers a timeless visual appeal and a grand look.

How to Install Glass Tiles

Among the numerous tiles available, homeowners are increasingly choosing glass tiles that add a unique look to their homes. Glass tiles are available in an assortment of colors, sizes, designs, shapes and styles that can easily blend with the decor of any room. In case you are thinking about installing glass tiles, you can choose amongst the various options, such as clear glass, frosted and bubble glass tile. Any of these glass tile options can easily spruce up any room in your home.

Choosing amongst these unique and beautiful tiling options is a daunting task, but once you have made the selection, it is time for installation. Installing glass tiles is not that difficult for experienced DIY enthusiasts; however, amateur DIY enthusiasts may need to be little careful while performing the task. If you are planning to install glass tiles, foremost, ensure that you have all the necessary tools and equipment needed to complete the task.

For installation, first, you need to prepare the substrate; ensure that the surface on which the tiles need to be installed is smooth, flat and without any cracks. The substrate should also be dry as well as perfectly clean so as to effectively apply the adhesive. Next, you need to apply is the thin-set; generally white, acrylic modified thin-set mortar is recommended by experts. It is usually available in pre-mix form, and is thus easy to use. Make sure not to use mastic adhesives, as these tend to become yellow with passing time.

For applying the thin-set, you can use the notched side of a 3/16″ V-notch trowel, which is easily available in the market. Hold the tool at an angle of 45° to the substrate for applying the adhesive. Make sure that the thin-set is thick enough to provide a strong grip, but not too thick as it may result in uneven surface, along with irregular spots and shrinkage. In case there are any ridges, you can smoother them with the long flat edge of the trowel, while taking precaution not to remove any thin-set.

Once the thin-set is appropriately applied, its time to install the glass tiles. You can cut the tiles into small pieces as these are easy to install. You can either use a mosaic glass cutter with blades shaped like small wheels or use a wet saw. After getting the desired size, ensure that the tile’s mesh side is clean, dry and free of any dust or debris. Be careful to install the tiles with its mesh side facing the contact surface. To ensure a tight, even bonding with the thin-set, use a wooden block held against the tile sheets and tap on it lightly. Make sure to remove any excess adhesive from the edges. Leave the tiles undisturbed during the curing time, as per the manufacturer’s recommendations.

After this, you can grout the joints with the help of rubber grout float, for increased performance and longevity of the glass tiles. It is advised to choose white colored un-sanded grout with a latex additive for fine finish; however, you may also choose other colors for added effect. Last but not the least, add an anti-microbial and mildew inhibitors that will protect the tiles against mold and mildew menace.

Following these simple steps, you can efficiently install the beautiful glass tiles in your home, adding to its aesthetic appeal.

Things to know about before tiling

Tiles are one of the most popular choices for various areas of the house, such as the kitchen and the bathroom. Some of the factors that make tiles so popular include high durability, ease of installation, availability of different designs and the related cost. Tiling is generally considered as an easy Do-It-Yourself project; however, there are a number of factors that you should keep in mind before initiating the tiling process.

The first major decision that you will have to make will be selecting from a wide range of tiles that are available in the market. This decision will be based on two factors, namely the tile material and the tile size. Ceramic, porcelain and stone are the most popular tiling material that is selected by people. A stone tile is renowned for its aesthetic appeal as well as its high durability. On the other hand, porcelain and ceramic tiles are comparatively inexpensive that stone times, and are aesthetically appealing as well.

Tiling size can significantly impact your project by affecting the effort put in by you as well as the end result. Generally, tiles of size 12”x 12” are considered to be ideal for a tiling project; however, these days you can find tiles of varying sizes. 6” x 6” tiles are also popular among homeowners, but they increase the effort required to complete the tiling project. Furthermore, large tiles are quite difficult to set evenly, thereby affecting the final outcome of the project.

After finalizing on the size and material of the tiles, it is important to select the pattern and design on the tiles. Since tiles can significantly affect the visuals of a room, it is important to select tiles that match with the décor of a particular room. For example, light colored tiles are generally preferred in the shower area to create a comfortable environment. On the other hand, the kitchen area should preferably be covered with dark colored tiles.

Next, you should carefully decide whether you want to use epoxy based grout or cement grout. Grouting is an essential aspect of a tiling project since it can ensure that the tiles stay in place for a long duration of time. Although epoxy grouts are highly effective, and errors during the installation process are quite hard to fix once epoxy grout has been installed. Grout color is also essential to ensure that the grouted area blends in with the tile décor.

Finally, you should have the proper tools and equipment to ensure an effective tiling job. Spacers are essential to ensure even spaces between two subsequent tiles. Leveling systems, such as the Tuscan leveling system, ensure that you are able to install tiles without any lippage. Being prepared with such tools beforehand will enable you to install a uniform and highly durable tiled floor.

Thus, it is evident that although tiling is quite a simple task, it is important to consider various factors to ensure maximum effectiveness. In case you are not confident of completing the job yourself, it is advised to hire a professional contractor.

Creating custom bathroom designs using standard tiles

Tiles are one of the most widely used home décor materials. Tiles are renowned for their high durability, and the aesthetic appeal provided by them to a room. It is due to these reasons that tiles are ideal for different areas of the house, such as the kitchen and the bathroom. Tiles can ideally be used as tabletops, flooring or a simple wall design. Although tiles can be used on different area, they are generally used to enhance the décor and the effectiveness of the bathroom.

You can easily find tiles made up of different materials; however, ceramic and porcelain are ideal for bathrooms. This is so, since ceramic and porcelain generally do not absorb water, thereby minimizing the chances of dirt settlement and mold. Furthermore, these tiles are easy to maintain and do not require regular cleaning.

Apart from the durability and maintenance aspect, the other major reason for the popularity of tiles is the wide range of colors and designs available. While selecting tiles for your bathroom you should decide on the size of the tiles, as well as the décor that you want. However, if you want a solid colored bathroom then size would not play such a major role.

In case you plan to tile a small bathroom area then it is important to select light colored tiles. Light colors will reflect the available light in the bathroom, thereby making it look larger than it actually is. Furthermore, light colors will also give your bathroom an airy look, thereby making it a lot more comfortable. Along with the colors you should keep in mind that the designs on the tiles should not be too large. Tiles with extensive designs generally do not suit small bathroom areas.

In case you are looking for appealing shades in your bathroom then a mosaic tile design would be an ideal option. For example, you can use a mix of blue and white tiles, with blue tiles forming the lower portion of the walls and the white ones covering the rest. There are various complex mosaic designs available in the market for you to select from, as per your preference.

As far as the floor of the bathroom is considered you can either use the same designs as that on the walls, or you can opt for a completely new pattern. Generally, different designs on the wall and the floor help in balancing the colors of fixtures, in case they are different in color. If you are planning to install radiant heating system beneath the flooring you can go in for warm colored tiles. This will create a comfortable environment inside the bathroom, especially during the winters.

Tiles can be selected on the basis of their color, size, designs as well as material that they are made up of. In order to custom design your bathroom you can either use your imagination, or can take the help of a professional decorator. Whichever option you opt for, you can be sure that tiles are going to last for a long duration and will enhance the visuals of your bathroom.

Tag: mosaic tiles

Choose the right flooring option to enhance the value of your house

Marble Floors Good or Bad

How to Install Glass Tiles

Things to know about before tiling

Creating custom bathroom designs using standard tiles

About Us

Contact Us

Quick Links

Newsletter Subscription