You May Also Like
EasyHeat Extra Temperature Sensor
$19.90Description
EasyHeat Extra Temperature Sensor
In Stock Ship Same Day
10 ft long
dual use 120/240 Volt
Minimum distance of 6" (15.24 mm) the sensor wire should extend between two adjacent runs of heating cable, measured from the arc of the Return Loop
The Temperature sensor wire monitors actual floor temperature for accurate comfort control.
If you are adding Extra Temp Sensors, run both sensors from the control box to the floor below and then weave them into the mat 6 to 12 inches from the wall. You can put them side by side, but connect only one to the thermostatic control. If you ever need to replace a faulty sensor, you’ll have one at your fingertips
Install the thermostat sensor wire at the same time as the heating mat installation, as it must also be embedded in the cementitious based mortar
The resistance of the sensor wire should be between 7 and 14 Kohms
Do not use staples to affix thermostat sensor wire, cold lead, or heating cables
Warm Tiles Elite Mats are designed for today's most popular floors, including:
Easy Heat Elite Installation Instruction
FGS Programmable Thermostat Installation Instruction
Toll free 877 880 8453 or Email contact@flooringsupplyshop.com