Pearl Abrasive 10in Pro Tile Saw VX10.2XLPRO
$2,297.00Description
Pearl Abrasive 10" Pro Tile Saw - VX10.2XLPRO
NEW AND IMPROVED 10" Pro Tile Saw!
Included with saw: professional diamond blade, stainless water tray, drip tray (fits front and back), blade wrench, 45/90 rip Guide, water pump, miter block, product manual and warranty card.
Patented Telescoping Table is available only from Pearl!
Important to note that this is a very high end saw, and has premium features over some of the general tools you will see at the box stores.
THE VX10.2XLPRO use only premium materials, all metal (no plastic), etc. Including stainless steel roller bearings on our telescoping table, a sealed induction motor, sealed electronic components, etc.
Advantages
- Rip cut 24" tile, Diagonal cut 18" tile
- Powerful 2HP sealed, belt-driven induction motor with thermal overload protection
- Stainless steel construction
- Compact (only 24" long) and lightweight (only 84 lbs.)
- Heavy duty stainless steel water tray for strength and durability
- Heavy duty ON/OFF switch
- Stainless steel rail guides
- 10-sealed metal roller bearings
- 10" professional diamond blade included
- One-year limited warranty.
- For use on all tile, hard porcelain, natural stone and masonry
Specification
- 2HP, 115v, 60Hz, single phase, 3,450 rpm belt-driven with thermal overload protection.
- Depth of cut: Max. 3-1/4"; Rip cut: 24" x 24" tile; angle cut: 18" x 18" tile.
- Speed: 3,450 rpm
- Max Depth of Cut: 3-1/4"
- Rip Cut Capacity: 24" x 24" tile
- Angle Cut Capacity: 18" x 18" tile
- Blade Capacity: 8" - 10" with 5/8" arbor size
- Thermal Overload Protection: Yes
- Arbor Shaft Rotation: Counterclockwise
- Width: 22 1/2”
- Length: 24”
- Height: 19 1/4”
- Weight: 84 lbs
- GFCI plug part# v35018
Background and Identification
This product is a tile saw manufactured by Pearl Abrasive. Tile saws, also called ceramic tile cutters, are used to cut ceramics into specific shapes. The VX10.2XLPROR uses a 10 inch diameter diamond blade that can cut tile up to 3 and 1/4 inches deep. This tile cutter is large enough to cut 24” by 24” tiles for rip cuts (cuts that are parallel to the ‘grain’), and 18” by 18” tiles for angle cuts (cuts that are not parallel to the ‘grain’). Tile saws can also be run wet or dry. This model is run ‘wet’, which means that it uses water as a coolant on the blade to keep it from overheating as it cuts.
If an additional rails and rail connectors are needed to extend rail length to 11', Part Numbers: VX5RCON and VX5R5.5 may be purchased separately.