Quare Design Shower Trays Radiance Slate Texture 36x36

Quare Design Shower Trays Radiance - Slate Texture 36x36

Available colors: Pure White and Graphite

Made of resin and Dolomite stone

This shower tray is Quare Design’s flagship product. The Relief Plus has been trusted by many customers to add style to their bathrooms, making it one of our best-selling products.

Radiance is a shower tray made of resin with a high mineral load, dyed in mass, available in texture with an anti-slip property (class B). The shower waste grid is made of the same material of the shower tray. In addition, It is a very resistant product but repairable at the same time. It can also be cleaned easily. Antibacterial treatment. High resistance to UV rays, weathering and hydrolysis. Tricomponent coating.

Analysis of Quare material

• Anti-slip Class C property according to DIN 51097/1992
• 2 Years warranty.
• Quare Material. Resin + mineral fillers.
• Cut to size. It can be cut on site.
• High Coating UV resistance.
• Installation: embedded (suitable for people with reduced mobility) or raised. Please consult the installation manual.
• Product available in Solid White, our uncoated Natural White.
• SUPERIOR HARDNESS coating (<0.01 mm. according to UNE EN 14688; maximum allowed 0.1 mm).
• Coating with excellent resistance to hydrolysis.
• Packaging in reinforced cardboard with wooden structure.
• Anti-bacterial treatment R<2 ISO 22196.

Analysis of Quare material

Quara Coating

• Composition: Bicomponent: hydroxylated resin cross-linked with aliphatic isocyanate
• Properties Thermostable
• High resistance to chemicals Class C slip resistance (PN 24)
• Antibacterial treatment: R>2 (JIS Z 2801)
• UV resistance according to EN 927-6: 2006 (colour fastness, i.e. no discolouration of white).
• The main difference to acrylic is the thermostability of our product, i.e. it cannot be deformed by heat. Acrylic shower trays are made of heated acrylic sheets that are shaped by thermoforming, whereas Quare products are shaped by a polymerised liquid that is then poured into a mould.

INTERNAL MATERIAL

- Composition:

• Microparticles of dolomite, polyester resin and additives.

- Properties:

• Made of resin and Dolomite stone
• Very hard and stable material, similar to granite.
• High material density
• A thickness of 25 to 30mm, which guarantees low noise transmission
• Thermal deformation of the product is impossible
• The back of the shower board is flat, which gives the possibility to install it on a flat floor, on a wooden frame or on quare feet.

IAPMO compliant CSA B45.5-17/IAPMO Z124/2017