Alpha Diamond Glass Blade Vetro 7 Inch

Alpha Diamond Glass Blade Vetro 7"

Chip-Free Wet Cutting for Glass Tile and Sheet Glass

Recommended for use on thick glass, also works well on thinner glass for cutting inside corners. Also performs well on porcelain tile.

Designed specifically for wet cutting glass, the Alpha Vetro allows for quick cutting while leaving an edge ready for polishing.

WG0438 Size 4-3/8" - Thickness 1.0mm - Maximum RPM 13,200 - Arbor(s) 7/8", 20mm - For Use On Stone Cutter
WG0700 Size 7" Thickness 1.6mm Maximum RPM 8,400 Arbor(s) 5/8", For Use On Tile Saw
WG0800 Size 8" Thickness 1.6mm Maximum RPM 7,400 Arbor(s) 5/8", For Use On Tile Saw
WG1000 Size 10" Thickness 1.6mm Maximum RPM 5,900 Arbor(s) 5/8", For Use On Tile Saw

Features

• Chip-Free Cutting on Most Demanding Applications
• Tile Installer's Choice for Glass Tile
• Excellent Choice for Plunge Cutting and Trimming Near The Edges of Glass
• Best Wet Cutting Glass Blade on the Market
• Fine Diamond Matrix is Perfect for Cutting Onyx
• Wet Use Only

Helpful Hints

- Do not force the blade to cut; allow the diamonds time to cut through the material. Slower cutting helps
eliminate chipping on the cut edge.
- Wet cutting is required.
- Review operations manual of the power tool to assure proper usage.
- Placing a piece of thin Styrofoam or 1/8” plywood under the glass can provide a cushion which can be
helpful in eliminating chipping.
- Use Alpha® PVA (Red & Blue) to ease and polish the edge of glass tiles.
- Use the Alpha® Corner Nippers and Alpha® Corner Rulers for other glass applications.
- Take appropriate steps to assure personal safety when performing any cutting application.