Ceramic Toilet Paper Holder - White Glossy - Thin Set Wall Mount

Ceramic Toilet Paper Holder - White Glossy - Thin Set Wall Mount

Thin Set Installation Item

This ceramic toilet paper holder is designed for wall-mounted thin set installation and provides a clean, practical solution for tiled bathrooms. Its classic ceramic design and glossy white finish work beautifully with ceramic tile, porcelain tile, and natural stone, making it an excellent choice for bathroom remodels, new construction, powder rooms, guest bathrooms, and residential or commercial restroom applications.

The holder mounts directly against the prepared wall surface rather than being recessed into the wall. Its generous 4.25" side projection provides convenient access to the toilet paper roll while the ceramic body creates a finished appearance that integrates naturally with the surrounding tile.

Important Notes

• Designed for thin set mortar wall installation.
• No mounting hardware is required.
• The two openings on the back are part of the mounting design and should remain open.
• Thin set should be built up around the two rear openings without blocking them.
• When the holder is pressed firmly against the prepared wall surface, the air within the openings can be compressed and may help create a suction effect that contributes to holding the holder securely while the thin set cures.
• Dimensions are approximate and may vary slightly between pieces.
• Always measure the actual product before completing the surrounding tile installation.

Dimensions

• Overall Size: 7" x 5.25"
• Side Projection: 4.25"

This wall-mounted ceramic toilet paper holder is manufactured from durable ceramic and designed for everyday bathroom use. The glossy white surface provides a clean, timeless appearance that coordinates easily with white bathroom fixtures and a wide range of tile colors and styles.

The compact wall-mounted design keeps the toilet paper roll conveniently within reach without requiring a separate metal mounting bracket or visible mounting hardware. It is well suited for custom tile installations where the bathroom accessory is incorporated directly into the overall tile design.

Key Features

• Durable ceramic construction
• Classic glossy white finish
• Wall-mounted design
• Designed for thin set mortar installation
• No mounting hardware required
• Two rear openings designed as part of the mounting system
• 4.25" side projection
• Clean appearance when installed with surrounding tile
• Ideal for ceramic, porcelain, and natural stone tile installations
• Suitable for residential and commercial bathrooms
• Easy-to-clean ceramic surface

Thin Set Installation Method

This ceramic toilet paper holder is designed to be secured directly to the prepared wall surface using thin set mortar. The two openings on the back are intentionally left open during installation. Thin set is built up around the openings rather than filling or blocking them.

When the holder is pressed firmly against the prepared wall surface, the air inside the openings is compressed. This can create a suction effect that helps hold the ceramic holder against the wall while the thin set mortar cures and establishes its bond.

Installation Instructions

1. Determine the Installation Location

Select a comfortable and convenient location for the toilet paper holder. Consider the finished tile layout and make sure there is adequate clearance for the toilet paper roll and easy access during normal use.

2. Prepare the Wall Surface

Prepare the wall surface according to the requirements of the tile and thin set system being used. The bonding surface should be clean, stable, and free of dust, loose material, grease, or other debris that could interfere with proper adhesion.

3. Apply Thin Set Mortar

Apply an appropriate amount of thin set mortar to the prepared installation area and/or the back of the ceramic holder according to the installation method being used. Build the thin set around the two rear openings. Do not fill or block the openings.

4. Press the Holder Into Position

Carefully position the ceramic toilet paper holder against the prepared wall surface. Press it firmly and evenly into place so the thin set makes proper contact with the back of the holder. Check that the holder is level and correctly aligned with the surrounding tile layout.

5. Hold and Secure the Position

Keep the holder properly positioned while the thin set begins to set. The two open areas on the back can allow the trapped air to compress as the holder is pressed against the wall, helping create a suction effect while the mortar establishes its bond.

6. Allow the Thin Set to Cure

Allow the thin set mortar to cure according to the thin set manufacturer's recommendations. Do not place normal use loads on the holder until the mortar has adequately cured.

7. Complete the Surrounding Tile and Grout

Complete the surrounding tile installation and grout the joint around the ceramic holder as appropriate for the installation. Remove excess thin set or grout from the ceramic surface before it cures.

Cleaning and Maintenance

Clean the glossy ceramic surface with a standard non-abrasive household bathroom or all-purpose cleaner. Avoid abrasive cleaners, scouring pads, or other products that may scratch or dull the ceramic finish.

Installation and Helpful Resources

• How to Install Ceramic Soap Dish with Tile Surrounding
• Installation of Ceramic Bathroom Accessories without Tile Surrounding

Shop Related Collections

• Shop Ceramic & Stone Bathroom Accessories

The installation method described above may also apply to other ceramic bathroom accessories with a similar rear mounting design, including soap dishes, shampoo shelves, corner shelves, and other ceramic wall-mounted accessories.