Nuheat FTG-F1P Programmable Floor Heating Thermostat

Nuheat FTG-F1P Programmable Floor Heating Thermostat

The Nuheat FTG-F1P is a programmable thermostat designed to control electric floor heating systems. It operates on 120VAC power and regulates the heating output based on the selected temperature and measured floor temperature.

Designed for indoor electric floor heating applications, the FTG-F1P provides programmable temperature control with separate comfort and economy temperature settings. The thermostat allows a heating schedule to be programmed for each day of the week, with four programmable temperature changes per day.

Key Features

• Designed for electric floor heating and underfloor heating applications
• 120VAC power supply, 50/60Hz
• 16.7A maximum resistive load
• Maximum load of 2,000W at 120VAC
• Programmable heating schedule for each day of the week
• Four programmable temperature changes per day
• Comfort temperature setting
• Economy temperature setting
• Automatic operating mode
• Manual operating mode
• Temporary temperature override
• Floor temperature control
• Floor temperature sensor included
• Built-in Class A 5mA GFCI protection
• GFCI test and reset functions
• Temperature display in Celsius or Fahrenheit
• 12-hour or 24-hour time display
• Digital display
• Wall-mount installation

What's Included

• 1 FTG-F1P 120VAC programmable thermostat
• 1 floor temperature sensor with 15 ft extension
• 2 mounting screws
• 4 solderless connectors for copper wire
• Installation instructions

Programmable Floor Heating Control

The FTG-F1P allows a separate heating schedule to be programmed for each day of the week. Four temperature changes can be programmed each day to match typical daily routines, including wake-up, leaving home, returning home, and bedtime.

The thermostat provides separate Comfort and Economy temperature settings. This allows the floor heating temperature to be reduced during periods when full heating is not required and increased again during scheduled comfort periods.

Multiple Operating Modes

The FTG-F1P provides both Automatic and Manual operating modes. Automatic mode follows the programmed heating schedule, while Manual mode maintains the selected floor temperature.

The thermostat also allows a temporary temperature adjustment without permanently changing the programmed schedule. The programmed settings can be resumed through the thermostat's operating mode controls.

Floor Temperature Control

The FTG-F1P uses an external floor temperature sensor to monitor the temperature of the heated floor. The included sensor is supplied with a 15 ft extension for installation with the floor heating system.

The thermostat activates the heating system when additional heat is required and stops the heating output when the selected floor temperature is reached.

Built-In Class A GFCI Protection

The FTG-F1P includes Class A 5mA GFCI protection designed to help protect against electrical ground faults. A dedicated TEST function allows the GFCI to be checked after installation, and the RESET function restores normal operation after a successful test.

Nuheat recommends testing the GFCI regularly. For complete GFCI testing instructions and operating procedures, refer to the FTG-F1P installation and operating instructions.

Electrical Specifications

• Power supply: 120VAC, 50/60Hz
• Maximum load: 16.7A, resistive load only
• Maximum power: 2,000W at 120VAC
• GFCI: Class A, 5mA trip level
• Temperature precision: ±0.5°C at 2,000W

Product Specifications

• Model: FTG-F1P
• Application: Electric floor heating
• Control: Programmable digital thermostat
• Temperature control: Floor temperature
• Power source: 120VAC
• Connectivity: Wired
• Mounting: Wall mount
• GFCI protection: Built-in Class A 5mA

Programming Features

The FTG-F1P allows users to customize the heating schedule for each day of the week. Each day can have up to four programmed temperature changes, allowing the thermostat to accommodate different daily routines.

The thermostat can be programmed around typical periods such as waking up, leaving for work, returning home, and going to bed. The schedule can be adjusted independently for each day to provide flexible floor heating control.

Temperature Display

The FTG-F1P allows the temperature to be displayed in either °C or °F. The thermostat also supports 12-hour or 24-hour time display through the configuration settings.

Installation Information

The FTG-F1P is designed for 120VAC indoor electric floor heating applications. The thermostat's resistive heating load must not exceed 2,000W at 120VAC.

The thermostat includes built-in GFCI protection, which requires proper separation of the line and load connections for correct operation. The included floor temperature sensor connects to the thermostat and should be installed according to the manufacturer's instructions.

Because this product involves line-voltage electrical connections, installation should be performed by a certified electrician in accordance with applicable local electrical codes and requirements.

Recommended Applications

The FTG-F1P is designed for indoor electric floor heating applications where programmable floor temperature control is desired. It can be used with electric radiant floor heating systems in residential spaces such as bathrooms, kitchens, bedrooms, living rooms, and other areas with heated floors.

Important Installation Information

Review the complete installation and operating instructions before installing or operating the thermostat. Verify that the heating system is compatible with the thermostat's 120VAC, 16.7A maximum resistive load and 2,000W maximum power rating.

Because the FTG-F1P connects directly to line voltage, installation should be performed by a certified electrician in accordance with applicable local electrical codes and requirements.

Shop Related Collections

• Electric Floor Heating
• Warmup Electric Floor Heating Systems
• SunTouch Floor Heating Systems